Baselit V3 User Manual

Baselit V3 Lightsaber User Manual: A Complete Guide

Welcome to the world of the Baselit V3 Lightsaber! This high-performance lightsaber is a fusion of cutting-edge technology and premium design, offering a dynamic and immersive experience for enthusiasts, collectors, and duelists alike. This manual provides all the information you need for safe operation, setup, and maintenance of your lightsaber, ensuring you can unlock its full potential.

SAFETY GUIDELINES

Handle with Care: Avoid excessive force during dueling or swinging to prevent damage to the blade or hilt.
Avoid Direct Exposure to LED Light: Do not look directly into the blade’s light source to prevent potential eye strain or discomfort.
Do Not Dismantle: Unauthorized disassembly or modification of the lightsaber may damage internal components and void the warranty.
Protect from Water and Extreme Temperatures: Keep the lightsaber dry and store it in a cool, stable environment to avoid damage to electronic components.

GETTING STARTED

Unboxing and Setup

Carefully Unbox Your Lightsaber: Avoid using sharp tools during unboxing to prevent accidental scratches or damage.
Inspect Components: Ensure all parts are present and undamaged, including the hilt, blade, hex key, USB charging cable, and user manual.
Install the Blade: Insert the blade into the emitter and align the retention screw holes. Use the provided hex key to tighten the screws securely. Ensure the blade is firmly in place.
Insert the Battery: Open the hilt’s battery compartment, insert the provided battery (Li-ion 18650 2000mAh), and close the compartment. Check the polarity markings to ensure correct installation.

Powering On the Lightsaber

Wake the Saber: Press and hold the power button for 2 seconds until the button lights up.
Ignite the Blade: Click the power button once to turn the blade on.

LIGHTSABER COMPONENTS

Your Baselit V3 lightsaber is composed of the following key parts:

The Hilt: The handle of the saber, containing the electronic components, battery compartment, and control buttons.
The Blade: A sturdy polycarbonate tube illuminated by a 9W baselit LED, providing vibrant lighting effects.
Controls: Buttons located on the hilt allow you to turn the saber on/off, change settings, and activate features.

OPERATING YOUR LIGHTSABER

Blade ON Functions

Blaster Deflect: Click the power button to simulate deflecting blaster bolts.
Lockup Effect: Hold the button while tapping the blade against an object to create a lockup effect. Release to exit.
Color Changing:
- Fast Color Change: Hold the button for 3 flashes, release, and click to choose a color.
- Infinite Color Cycle: Hold the button for 2 flashes, release, and click to lock the desired color.

Blade OFF Functions

Volume Control: Hold the button for 1 flash, release, and toggle through 3 volume levels.
Light Effect Settings: Hold the button for 2 flashes to cycle through light effects, including stable, unstable, and pulsating modes.
Ignition Style Settings: Hold the button for 3 flashes to change how the blade ignites.
Flash on Clash (FOC): Hold the button for 4 flashes to enable or disable the flash-on-clash effect.
Sleep Mode: Hold the button for 10 seconds to turn off all lights and enter deep sleep mode. The saber will also enter sleep mode automatically after 10 minutes of inactivity.

ADVANCED MOTION CONTROLS

Blade OFF Motion Controls

Twist to Ignite/Deactivate: Rotate the hilt clockwise and counterclockwise to turn the blade on or off.
Swing On/Off: Swing the saber quickly to ignite the blade. Repeat to turn it off.
Stab and Pull: Perform a stabbing motion forward to ignite the blade. Repeat the motion to retract it.

Blade ON Motion Controls

Color Jump Mode: Hold the button, twist the hilt clockwise, then counterclockwise to jump through colors. Click to lock the color.
Rotating Color Change: Hold the button, point the hilt downwards, and rotate it to cycle through colors. Click to confirm.
Force Effect: Point the hilt upwards, press the button, and twist it clockwise, then counterclockwise to trigger a force effect.
Melt Effect: Hold the button, push the blade forward, and twist the hilt to activate a melt effect. Use the twist motion to change the melt color.
Lightning Block: Hold the button and pull the hilt inwards to simulate blocking lightning attacks.
Multi-Lock Mode: Enter lockup mode, hold the button for 0.5 seconds, and release to activate Multi-Lock Mode. Use the same control to exit.
Multi-Block Mode: Hold the button and swing the saber to enter Multi-Block Mode. Repeat the action to exit.

CHARGING YOUR LIGHTSABER

Connect the Charger: Plug the provided USB cable into the charging port on the hilt. Use a 5V/1A charger for best results.
Charging Indicator: A light will illuminate during charging and turn off when fully charged.
Charging Duration: Do not exceed 4–5 hours of charging to avoid overcharging the battery.
Battery Maintenance: Recharge the saber every 2 weeks to maintain battery health. If not in use for long periods, store the battery at 50% charge.

FEATURES OF THE BASELIT V3 LIGHTSABER

Bright LED Blade: A 9W baselit LED provides vibrant, evenly distributed lighting.
Blade Modes: Choose from Stable, Pulsing, or Unstable modes to customize your blade’s appearance.
Dynamic Effects: Includes Blaster Deflect, Drag, Melt, Lockup, and Lightning Block.
Motion Controls: Gesture-based controls for blade activation, color changes, and effects.
Rechargeable Battery: Powered by a durable 18650 Li-ion battery for long-lasting use.
Durable Construction: The hilt and blade are designed for light to moderate dueling.

TROUBLESHOOTING COMMON ISSUES

Blade Won’t Turn On:
- Ensure the battery is properly installed and charged.
- Check that the blade is securely attached to the hilt.
No Sound:
- Adjust the volume settings.
- Ensure the saber is not muted and that the battery is charged.
Blade Flickers or Dims:
- Recharge the battery.
- Confirm proper alignment of the blade with the emitter pins.
Unresponsive Controls:
- Perform a reset by removing and reinserting the battery.
- Ensure all screws are securely fastened.

CARING FOR YOUR LIGHTSABER

Clean the Blade: Use a soft, damp cloth to remove dust or debris. Avoid abrasive cleaners.
Hilt Maintenance: Wipe the hilt with a dry cloth and inspect for loose components.
Storage: Keep the saber in a cool, dry place away from direct sunlight.
Battery Disposal: Dispose of old batteries according to local regulations.

WARRANTY AND SUPPORT

Your Baselit V3 Lightsaber includes a limited warranty covering defects in materials and workmanship. Warranty claims require proof of purchase and a detailed description of the issue. Contact our customer support team for assistance.

The anakin se saber is absolutely beautiful. The snv4 pro soundboard is unlike any saber i've ever used, this is my first "real" saber and i couldn't be happier. The store's communication was fantastic, quick to answer all my questions and even assisted with special ordering extra parts. The saber was on back order when i placed my order but it still arrived two days ahead of the estimated date provided by customer service. I think i've started an addiction and will almost definitely be buying more savers from this store. I think i need the ahsoka and obi-wan hilts now.

To say i was skeptical would be an understatement, but when it it arrived it not only showed up well packaged but also was exactly what they said it was.

I got the sn-pixel v4 pro, this is a neopixal blade unlike the others that are just hallow light up blades. I have plenty of video of it now, but doesn't really let me send video, so apologies for the picture only

the sword is nice I replaced the blade with a better quality and longer one. The bottom blade is quite flexible, it can completely resist heavy duels.
The sleeve is long and fits perfectly with 2 large hands. The sound is good but without more (6/10)

Fantastic product, very good price. The hilt looks and fees good too. It took a while to ship but i can’t complain too much given the great price.

Good quality. Thanks.

It arrived within a week of ordering.
The packaging was also sturdy and careful.
I would like to make another purchase if I have the opportunity.

Good repro light saber for the price. Blade is short, but the description shows this. I was expecting it to be short, and it will make a good prop for a cosplay when mobility is a factor.

For the price i paid im happy

The light saber came as described and is really awesome!! I am definitely going to buy more as gifts in the future from here because of how easy it was.

Totally awesome

It's great, I loved it

Exact outer diameter and inner diameter in a stylish material...good

Norm

Very cool. I accidentally hit my mom with it and now’s she’s dead.

Very pretty sword, of good quality, very fast shipping, I just regret that upon extinction, it does not keep the previously used modes in memory.

Seller that I recommend.

Works as stated in the item description. It's a shame there are no instruction manual in German.

thanks 😊 🫂 🙏

It arrived faster than I expected! The quality of it is so good! Highly recommended.

This was my first order from AliExpress, and specifically X-TREXSABER. The lightsaber came well packaged in a really cool case. It was simple to disassemble, charge, reassemble and then attach the blades. You have to be careful not to lose the screws as they are small, but they're easy to screw into place.

There are so many sounds, blade types and activation effects. I was blown away by the amount! I had to cycle through a few to get to Maul's sound effect, but the quality is so good and there's loads to choose from.

Super metal handle several colors. I recommend

item arrived and as described in the advertisement

Liked

Super ok